home support product_info vinci_bms vinci_bms_topologies vinci_ev vinci_bms_ev_vincibus

Vinci EV BMS, VinciBus topology

Description, configuration and ordering


Slaves sense cell voltages through a number of tap wires.

The BMS uses a Master/Slave topology, consisting of a number of modules; communication among all modules is through a 5-wire bus.

The BMS consists of:

Item Info Function Qty
VinciBus Battery Master Info Manage the battery 1
VinciBus Wired Slaves Info Interface to a bank of cells 1+
Application module Info Add Traction Pack functions 1
Contactor set Info Precharge, disconnect the battery 1
Current sensors Info Sense the battery current 0~2
Cell wiring components Info Connection to the cells 1+
VinciBus wiring components Info Between modules 2+
Communications adapters Info To a computer for monitoring (1)
Block diagram
Wired VinciBus topology

System configuration and ordering

For spare parts, please contact us


In this page:
© 2008~2024 Elithion™, Inc.. All rights reserved. The Elithion brand and the logo with an 'ə' (upside down 'e') are Trademarks of Elithion Inc.
Policies - Contact us - Mobile site Page published on Feb 06 2018.
Pop-up enlargement